ARTEMIA
ENRICHMENT PREPARATION
1. Mix measured amount
of AlgaMac-2000 with either fresh or saltwater in
electric blender for one minute or until completely emulsified.
Spray-dried particles break down
into individual cells (6-8 microns).
2. When blending is complete,
strain through sub-80 micron mesh to eliminate any foam.
ARTEMIA ENRICHMENT
Transfer newly hatched Artemia nauplii to an enrichment tank with clean, filtered seawater. Maximum density of Artemia should not exceed 100,000 nauplii per liter of water. Add the prepared
AlgaMac-2000 mixture to the enrichment tank at a rate of 0.2 grams per liter (per 100,000 nauplii). Aerate enrichment tank vigorously so that oxygen levels exceed 4ppm during the
8 hours of enrichment. Harvest the enriched Artemia nauplii after
8 hours. If higher levels of DHA
are desired, repeat enrichment process by adding another
0.2 grams per liter for an additional 8 hours.
Ratio of Application: 0.2 grams /
liter / 100,000 nauplii / 8 hour enrichment period
